- Ex-rental Electronic RF and Fibre Optic Test and Measurement Equipment to include but not limited to -
IDEXX Catalyst One | Veterinary chemistry analyser - JDSU OLT-55 | Optical loss test set
- WG EichPegelmesser Milliwatt Test Set | RF milliwatt power meter (10 Hz to 300 MHz)
- Keysight N3305A | DC electronic load mainframe
- Tektronix TDS784D | Digital oscilloscope
- HP 11713A | Attenuator and switch driver
- Keysight 34902A | 16-channel multiplexer module for 34970A/34972A
- Keysight N6781A | SMU module for N6700/N6705
- Rohde & Schwarz Hameg HM8115-2 | Programmable power analyser
- EXFO FTB-1 + FTB-860G | Handheld network test platform with Ethernet module
- Mulda Berlebach Tripods (for parts) | Tripod parts lot
- Radiant Imaging PM-1423E-1 | Imaging photometer
- Praxsym Practical System Transmitter | RF system transmitter
- Agilent E4350B | Solar array simulator
- VIAVI OneExpert ONX-630 | Installation meter
- Keysight Attenuator + N8482B Power Sensor 6 GHz
- MTS-6000A + OSA610 | Optical test platform with HR OSA module
- MTS-8000 with OSA | Optical test platform with OSA module
- Narda NBM-550 | Broadband field meter with 3GHz probe
- HP 86142A | Optical spectrum analyser
- Agilent 81130A | 400/660 MHz pulse/pattern generator
- Burleigh WA-7600 | Wavemeter and optical channel analyser
- Spirent MX-100G-F2 | HyperMetrics MX 40/100G CFP2 2-port test module
- Keysight N2803A | 30 GHz InfiniiMax III differential probe amplifier
- GW Instek GSP-9330 | Spectrum analyser, 9 kHz to 3 GHz
- California Instruments 1501L | AC power source
- Druck UPS-III-IS | Intrinsically safe loop calibrator
- Anritsu 15RNFN50-1 | RF coaxial adapter
- Anritsu ML2437A | RF power meter
- Agilent 34941A | Quad 1x4 RF multiplexer switch module, 50 Ohms
- Keysight N5442A | BNC adapter
- Agilent/Keysight N5477A | Probe accessory
- Agilent 8163A | Lightwave multimeter mainframe
- Ametek Modular Power | Modular DC power system
- Agilent N6702A | 1200 W low-profile DC power system mainframe
- Agilent N6702A | 1200 W low-profile DC power system mainframe
- Agilent 1131A | 3.5 GHz differential probe amplifier
- Agilent E9327A | Peak and average power sensor
- JDSU JD745A + Power Sensor + Cal Kit | Base station analyser bundle
- Anritsu MS2712E | Handheld spectrum analyser with options
- Associated Research 3160 | Hipot tester
- Keysight 8901B | Modulation analyser
- Tektronix TLA5204 | Logic analyser mainframe
- VIAVI 4138FMA365FCC | Optical test module
- Kathrein 80010111 | Antenna component
- Sumitomo FC-6RS | Fibre cleaver
- JDSU Test Leads | Test leads set (lot of 23)
- Fujikura 12S | Fusion splicer no power
- Fisherbrand SureOne Filter Pipette Tip Reload | Pipette tips reload pack
- JDSU OTU-8000 | Optical test unit platform
- VIAVI MTS-2000 | Mainframe
- VIAVI MTS-5800 | Handheld network tester
- VIAVI OTU-8000 | Optical test unit platform
- LMW Electronic ST | Survey signal generator
- Keysight 86130A | Bit error ratio tester (BERT)
- Agilent 85131D | Test port cable set
- WG Cable Simulation PKN-1 | Cable simulator
- Keysight N4960A | Serial BERT controller
- Keysight M9537A | AXIe embedded controller
- Bird Model 43 Thruline | RF wattmeter
Important Information
Auction End Date: 9th October 2025 from 10am BST
Payment Due Date 14th October 2025 by 4pm BST
Viewing Data: 2nd October 2025 10am to 2pm BST (Strictly by appointment)
---
INTERNATIONAL BIDDERS:
You may arrange your own collection or we may ship to your freight forwarder in the UK, or to an international destination.
This will be subject to packing fees, shipping fees, insurance.
You are responsible for clearing customs and paying import taxes and duties.
VAT will be charged on Hammer Price and Buyer's Premium. VAT refund for Hammer Price will only be refunded on proof of export. VAT on Buyer's Premium is non-refundable.
---
Collection Location: Blackburn, BB2
Collection Deadline: 21st October 2025 by 4pm BST
Sale Currency: GBP
Buyer's Premium: 15%
VAT on Hammer: 20%
VAT on Buyer's Premium: 20%
---
Collections and Shipping:
- In person collection is by appointment only from BB2.
- Customer can arrange their own collection subject to packinging fees. Please contact us for an accurate quote (With Lot numbers).
- We can arrange shipping. Please contact us before bidding for an accurate shipping quote.
---
Before you bid:
- All Lots are sold as is where is, with no warranties expressed or implied.
- All Lots are subject to a buyer's premium (BP), which is shown in the auction catalgue page and also in each lot page
- VAT is always applicable to the BP.
- VAT is always applicable on the Hammer price
- Payments cannot be made on site. All purchases must be paid for in full, in GBP, by bank transfer, before clearance
- If you are exporting goods won in the auction, the VAT on Hammer must be paid first, and will only be refunded on receipt of proof of export.
- Please note then late on non-payment will result in losing your deposit.
Canterbury Street
Blackburn
BB2 2DY
UK
